IMAGE Kills Crabgrass_II is a post-emergent, selective herbicide.

Apply IMAGE Kills Crabgrass_II to weeds once they appear from the ground. Best results are obtained on young, actively growing weeds.

How to Apply IMAGE Kills Crabgrass_II

Applying IMAGE Kills Crabgrass_II is easy and requires little cleanup. The contents of each packet are completely water-soluble and specifically made for tank sprayers. The contents of one packet mix with one gallon of water in a tank sprayer for application. Spray undesirable weed until wet. DO NOT allow spray drift to contact landscape ornamentals, shrubs and trees. DO NOT apply with hose-end applicators. DO NOT exceed one application per year.

For Grass Types:

This product is tolerant on well established lawns and the following grass types: Creeping Bentgrass, Kentucky and Rough Bluegrass, Fine and Tall Fescue, Perennial Ryegrass, Bermudagrass, Buffalograss, Centipedegrass, Seashore Paspalum and Zoysiagrass. DO NOT apply to St. Augustinegrass. May be used on seeded, sodded or sprigged lawns that are well established.

Lawn Preparation:

• Keep children and pets out of the treated area until sprays have completely dried.
  
  
• Works best when adequate soil moisture is present at application. If soil is very dry, water 1-2 days before applying.
  
  
• Best weed control results will be obtained when no rainfall or watering occurs within 24 hours after application.
  
  
• However, if no significant rainfall or watering occurs within 7 days after application of this product, then watering is recommended.
  
  

• Remove one packet from the box.
  
  
• Fill a clean one gallon tank sprayer with ½ gallon of water.
  
  
• Add the contents of one packet with agitation.
  
  
• Finish filling the gallon sprayer with ½ gallon of water and continuous agitation.
  
  
• Spot treatment: spray thoroughly to wet all undesirable listed weeds
  
  
• One packet diluted in one gallon of water treats 500 square feet.
  
  

• When finished, triple rinse the tank sprayer and use rinsate to treat weeds.
  
  
• Wash hands and clothing.
  
  
• If product is left standing for extended period of time before spraying or left to stand after application be sure to shake well again before spraying.