| |
IMAGE Herbicide Controls Southern Summer
& Winter Weeds
Apply IMAGE Herbicide on summer weeds following the
spring green up of the turf and preceding the onset of winter dormancy.
To prevent severe discoloration, applications should not be made before
or during turf transition or during periods of very slow growth. NOTE: Do
NOT apply to St. Augustine lawns for winter weed control.
How to Apply IMAGE Herbicide
Applying IMAGE Herbicide is easy and requires little
cleanup. You can use IMAGE Herbicide for spot treatments with a trigger
or pump up sprayer or treat large areas with a hose end sprayer. When using
IMAGE, you should expect to see weed discoloration in 1 to 2 weeks and dead
weeds in 3 to 4 weeks.
IMAGE Herbicide can be applied using a hand-trigger sprayer, pump-up sprayer
or hose-end sprayer.
Applying IMAGE Herbicide Using a Hand-trigger or Pump-up
Sprayer:
 |
|
Mix 2.5 oz. of IMAGE (5 tbsp.)
per gallon of water.
|
|
Spray lawn until wet.
|
Applying IMAGE Using a Hose-end Sprayer:
Using Dial'n Spray:
|
|
Pour 16 oz. IMAGE into plastic
jar.
|
|
Set metering dial to 4 tsp.
|
|
|
Uniformly spray over coverage
area. Will cover approximately 4,000 square feet.
|
Using Spray-ette 4:
|
|
Pour 7.5 oz. IMAGE into plastic
jar.
|
|
Fill water to 4-gallon mark.
|
|
|
Uniformly spray over coverage
area. Will cover approximately 2,000 square feet.
|
Water-in at a rate of 1/2 inch within 1 to 7 days
to wash IMAGE into the root zone where the greatest weed control activity
occurs. A second application can be made in 6 weeks.
Using Connect & Spray:
|
|
Shake well and attach to hose.
|
|
Turn water on at faucet, aim nozzle toward lawn and turn control lever to ON to begin spraying.
|
|
|
When finished turn control lever to OFF position. Turn faucet off.
|
|
 |
|
